
·Data Store: 4 groups, total 320 measurements, max 80 readings will be stored for each group. If over 80 readings, please delete the group, or it will not store the new
measurements.
·USB Data Transmission: Connect it to PC, then you can download, analyze and store the measured readings. The software is compatible with Windows SVR
2000/2003/2008 and Windows XP/Vista/7/8 (32&64 Bits).
·Easy to Carry: Included a plastic toolbox, users would no longer have to worry about carrying and storage problems. USB cable, software CD, and batteries are also in
the toolbox.
![]() |
![]() |
![]() |
![]() |
Manual Calibration·Zero Calibration 1. Enter into zero calibration from the menu;
2. Then put the gauge on the sample substrate (Fe/ Al).
·Multi-point Calibration 1. Do zero calibration first;
2. Select one standard foil that the value close to what you want to measure from the included 5 standard foils with value and then put it on the sample substrate (Fe/ Al); 3. Enter into any one point calibration from the menu; 4. If the reading isn't the same as the value on the standard foil, press the "up/down" button to set it as the same number. Note:Please make sure that the gauge and the measuring surface keep 90 degrees vertical. |
Technical Parameters
Measuring Range | 0 to 2000um (0 to 78.7mils) |
Units | um, mm, mils |
Min Curvature Radius Convex | 5mm |
Min Curvature Radius Concave | 25mm |
Min Measuring Area | Diameter 20mm |
Min Thickness of Substrate | 0.2mm (Probe F); 0.05mm (Probe N) |
Max Measuring Rate | 2 readings per second |
Computer Interface | Download data via USB |
Power Supply | 2* 1.5V AAA battery |
Standard Compliance | CE ROHS FCC ISO2178 ISO2360 |
Dimensions | 110mm*53mm*24mm (4.33"x2.09"x0.94") |
Net Weight | 92g (3.24oz) |
Package List | 1x Coating Thickness Gauge 1x Aluminium Substrate 1x Iron Substrate 5x Standard Foil 2x AAA Battery 1x USB Cable 1x CD Software 1x Tool Box |