This solar-powered motion sensor light could be a practical lighting fixture for both indoor and outdoor occasions like porch, hallway, shed, barn, and garage. It brings out undiminished white light to get your expectation covered.
Work only in the dark: auto on dim light -- motion detected -- high light -- motion disappears -- 20s high light -- dim light
MODE 2: Motion Sensor Mode (at Night)
Work only in the dark: off -- motion detected -- high light -- motion disappears -- 20s high light -- off
MODE 3: Always ON Mode (at Night)
Work only in the dark: always on
MODE 4: Always ON Mode (Day & Night)
Always on
4 Lighting Modes
MODE 1: Motion Sensor & Dim Light Mode (at night)Work only in the dark: auto on dim light -- motion detected -- high light -- motion disappears -- 20s high light -- dim light
MODE 2: Motion Sensor Mode (at Night)
Work only in the dark: off -- motion detected -- high light -- motion disappears -- 20s high light -- off
MODE 3: Always ON Mode (at Night)
Work only in the dark: always on
MODE 4: Always ON Mode (Day & Night)
Always on
Specs
Material
|
PC (lampshade); PC+ ABS (shell)
|
Solar panel
|
6W 6V
|
Output power
|
8W
|
Luminous flux
|
800lm *2
|
Dimmable light
|
6 brightness levels
|
LED quantity
|
35pcs *2
|
LED light color
|
white
|
Built-in battery
|
6600mAh
|
IP rating
|
IP65
|
Power cord length
|
16.4ft/5m *2
|
Warm Notice
1. Press and hold the Switch Button on the lamp body for 5 seconds to activate the lamp, then short press this button to switch the lighting mode, or use the remote to control the light.
2. The light will stop solar charging when it is working in MODE 4. So if the light is working in MODE 4, you should switch it off to make the solar panel get charged.
3. While connecting the power cord, please do keep the arrows on both connectors in alignment. If not, the light will activate self protection and will not work.